Do you know what the bulbous bow is for?


Maritime Knowledge | 06/02/20

Ships are extraordinary designs, which even with just their size can amaze. But there is one specific element of a ship’s design that stands out, and what is more, not many know what it does exactly. We are talking of course, about the bulbous bow. The bulbous bow is that strange protrusion at the ships’ forward end, sticking out below the water. It serves a very important role for the ship, and in this article we are going to analyze it. Disclaimer: The article contains a little bit of maths, but don’t worry we will keep it simple.

What is a bulbous bow

Without a doubt, at some point of your life, you have made the question, while looking at a ship: What is this metal in the front?

Well, it is called the bulbous bow. The name origin is simple, as this structure generally resembles the shape of the bulb, and is always placed at the bow of the ship. Hence, bulbous bow, and it serves a very specific purpose.

The new pre-fabricated bulbous bow section being lifted and fitted by EBH Namibia onto the Huascar in Namdock

How does a bulbous bow work

First of all, it is important to remember that bulbous bows are all designed specifically for a certain ship, in which they are fitted. To understand its operations, let’s consider a vessel without a bulb fitted: the Titanic.

As the Titanic moves through the water, a pressure wave builds up at the front of the ship. This move increases the height of the water, with the ship pushing it ahead. But that water has to go somewhere.


What happens is that, the water flows back down the side of the hull, and will keep flowing back down, creating a wave all the way along the hull.

Of course, having a constant wave on the side of the hull is an issue, as it will increase the drag of the vessel. This happens as the Titanic is now in contact with a larger surface area of water, which is coming higher up the hull.

The result? The ship is moving at an inconsistent speed, as it is going up and down, as well as along. In addition, the inconsistent speed increases fuel consumption.

We need to find a way to mitigate this wave. This is where maths come in. There is a certain mathematical model that explains the solution. The following graph resembles the move of the wave in a ship without a bulbous bow.

If we add another curve on the same graph, that is 180 degrees out of phase with the initial curve, they will actually cancel each other out.

If this model is applied on a ship, it could mitigate the initial wave that is causing all that drag.

The addition of a bulb enables this model on shipping, as it will affect the way the water moves around the hull. Specifically, with the bulb the waves generated by the hull, and the waves generated by the bulbous bow, will cancel each other out, basically flattening out the waterline.

What are the new results? Less drag, as well as less fuel consumption.

Designing the right bulbous bow

According to a 1978 paper by Alfred Kracht – one of the most comprehensive studies on bulbous bows – a Computational Fluids Design (CFD) analysis is crucial.

Such an analysis will optimize the bulb and ensure that it is built in a good shape. However, the minimal scope when designing a bulbous bow should include at least the following two design cases:

  • Base case – An unmodified hull without the bulbous bow;
  • Addition of the bulbous bow.

Both of them are crucial, as without the base case, the CFD may provide incorrect results, and the bulb will not actually help; it may even add to the fuel consumption.

The limits of bulbous bows

As we said above, bulbous bows are specifically designed for a certain ship, and they only work when they are applied correctly.

But the speed of the vessel also plays a key role in the efficiency of the bulb. Namely, the wavelength of the two wave systems we mentioned earlier, changes depending on the vessels’ speed. What is important to have in mind, is that those two waves only line up at one speed. In fact, a difference of just 2 knots from the ship’s design speed could harm the efficiency of the bulb.

For this reason, bulbs are recommended for ships that will spend the majority of their entire life at one specific speed. This is an issue with many extensions. For example, if fuel prices increase, slow steaming may become attractive. But in that case, it is possible that the bulb will not help as much.

However, despite these limitations, many ships that have bulbous bows will experience major fuel savings. But, this will only happen if the bulb is installed correctly. Investing in engineering is key if you are going to use a bulb.

Another area of concern is the fact that bulbous bows are designed assuming calm water conditions. But such conditions are rare in the ocean. However, the industry has discovered that for the majority of storm conditions, the bulb can still work properly.

The limitation exists when especially large waves or small vessels come into the picture. In these cases, the bulb could not be able to create a steady wave system.

Therefore, it can be understood that fast ships, with low block coefficient, are not the best candidates for bulbous bows. As a matter of fact, they can drop in performance very quickly, even with normal sea state.

On the other hand, big, slow ships, with a high block coefficient, are good candidates. So, what ships are fit to be equipped with bulbous bows? These could be large freighters that are operating on a fixed schedule, such as:

  • Container ships;
  • Large bulk cargo carriers;
  • Oil carriers.

and cruise ships as well.

Getting a ‘nose job’

Much like people, ships can also get a nose job, and much like people, they do it for improvement. In the ships’ case, improvement relates to fuel efficiency.

As we said, slow steaming can sometimes be an attractive choice, but a different speed could cancel out the efficiency of the bulbous bow. Enter ‘nose jobs’.

‘Nose job’ for ships means the replacement of the bulbs to ensure better performance in slow steaming environments. A new bulbous bow could provide better fuel savings, while they could also contribute to CO2 emissions reduction.

Maersk is the leader in ships’ ‘nose jobs’, having carried out about 12. This operation has gained for the company fuel savings of around 5%. What is more, NYK Group has achieved 23% reduction of CO2 emissions over six months.

As anyone can understand, a properly researched and installed bulbous bow, can enhance the fuel efficiency for ships. But the key word here is properly. If the study of the bulb provides wrong results, or if there is a mistake during the installation, then the bulbous bow will not be able to provide its benefits. We hope now that next time you will see a bulbous bow on a ship you will know what it does, and – why not – brag about it to your friends.

Leave a Reply

SSCP   CAS-002   9L0-066   350-050   642-999   220-801   74-678   642-732   400-051   ICGB   c2010-652   70-413   101-400   220-902   350-080   210-260   70-246   1Z0-144   3002   AWS-SYSOPS   70-347   PEGACPBA71V1   220-901   70-534   LX0-104   070-461   HP0-S42   1Z0-061   000-105   70-486   70-177   N10-006   500-260   640-692   70-980   CISM   VCP550   70-532   200-101   000-080   PR000041   2V0-621   70-411   352-001   70-480   70-461   ICBB   000-089   70-410   350-029   1Z0-060   2V0-620   210-065   70-463   70-483   CRISC   MB6-703   1z0-808   220-802   ITILFND   1Z0-804   LX0-103   MB2-704   210-060   101   200-310   640-911   200-120   EX300   300-209   1Z0-803   350-001   400-201   9L0-012   70-488   JN0-102   640-916   70-270   100-101   MB5-705   JK0-022   350-060   300-320   1z0-434   350-018   400-101   350-030   000-106   ADM-201   300-135   300-208   EX200   PMP   NSE4   1Z0-051   c2010-657   C_TFIN52_66   300-115   70-417   9A0-385   70-243   300-075   70-487   NS0-157   MB2-707   70-533   CAP   OG0-093   M70-101   300-070   102-400   JN0-360   SY0-401   000-017   300-206   CCA-500   70-412   2V0-621D   70-178   810-403   70-462   OG0-091   1V0-601   200-355   000-104   700-501   70-346   CISSP   300-101   1Y0-201   200-125  , 200-125  , 100-105  , 100-105  , CISM   NS0-157   350-018  , NS0-157   ICBB  , N10-006 test  , 350-050   70-534   70-178   220-802   102-400   000-106   70-411  , 400-101   100-101  , NS0-157   1Z0-803   200-125  , 210-060   400-201   350-050   C_TFIN52_66  , JN0-102  , 200-355   JN0-360   70-411   350-018  , 70-412   350-030   640-916   000-105   100-105  , 70-270  , 70-462   300-070  , 300-070   642-999   101-400   PR000041   200-101  , 350-030   300-070  , 70-270  , 400-051   200-120   70-178   9L0-012   70-487   LX0-103   100-105  ,