How best to avoid stern tube damage

0 comments

How best to avoid stern tube damage

Tue 07 Aug 2018+

How best to avoid stern tube damage
How it should be done: although at light draught on trials, this ship’s propeller is fully submerged (credit: NASSCO)

Hull and machinery insurers, P&I clubs and classification societies are reporting increased cases of stern tube damage because of incomplete propeller immersion, writes Glen Ralston

The use of low-immersion propellers on some vessels with low-speed fixed-pitch installations is not new. As such, increasing incidences of stern tube damage caused by incomplete propeller immersion may suggest that operational considerations need to be better addressed. Such propellers are used on a diverse range of vessels, such as bulk carriers, container vessels and large tankers, due to draught restrictions at certain ports; they also come into play when vessels are in a lightship condition.

Owners and operators need to recognise when these situations will occur and make a voyage plan before entering or manoeuvring in restricted rivers and ports where these conditions exist.

Stern tube failure can happen quickly when low immersion conditions occur. Its main cause is the loss of the hydrodynamic lubrication film within the white metal bearing, causing a rapid temperature rise and overheating. This wipes the bearing surfaces, rendering the stern tube ineffective and causing delays and expensive repairs that the owner and operator must address quickly.

Although the specific problem of failing water-lubricated bearings because of low immersion operation has not been recorded that often, other issues relating to stern tube bearing failures have been widely reported. Some shipowners who have opted for this design and fitted them on newbuild tonnage have experience premature failures due to factors including: loss of the hydrodynamic film; rapid wear rates of the stern tube running surface materials; and the working environment of these stern tube bearings and seals.

Stern tube failure can happen quickly when low immersion conditions occur”

Conditions in which stern tube failures occur vary and can be affected by the overall condition of the propeller, rudder, stern tube and main engine. When looking into the factors that cause specific failures, a number of issues must be considered.

A main consideration is the detrimental effect of wiping the bearing due to loss of the oil film, causing shaft and bearing contact. Hydrodynamic lubrication failure will lead to excessive temperatures and other symptoms including reduced engine performance. Although this failure may not be a direct result of low immersion, the effect of cyclic loading and shear stress on the stern tube bearings over time may lead to failures.

Pressure conditions within the bearing surfaces should also be considered. The stern tube manufacturer’s recommended oil supplier should be consulted, as it will advise the oil grade to be used with the correct viscosity during service. It will also have information about service life suitability, but regular sampling should be carried out to monitor water contamination.

The propeller shaft diameter and weight determine the contact area on the bearing, but shaft misalignment tolerances will affect the overall bearing load distribution. This will also be influenced by the propeller’s weight, which will cause bending moments along the shaft leading to localised pressure variations.

When the propeller is only partially immersed, its performance is usually another main contributory cause of stern tube problems. Because it is not operating to its optimum and designed thrust and torque parameters, the effects of eccentric thrust, cavitation and vibration will create uneven load distribution and inadvertently lead to bending monuments and localised stress areas, especially in the aft part of the bearing where edge loading may develop and increase over time. Apart from the stern tube being exposed to damage, cavitation damage on the propeller may also occur as a result of operating the vessel in these conditions over an extended period of time.

Large rudder angles when the propellers are in a low-immersion condition can also play a part in increasing the risk of damage, as propeller wash efficiency is reduced causing the vessel to respond to helm orders more sluggishly. In some instances, this can cause the master to increase main engine power and speed, exacerbating the situation.

Foreign materials on the water surface around the propeller area can also contribute to stern tube bearing failure. Logs, ropes or other sizable objects can contact the propeller blades as they break through the water, leading to localised damage and increased cavitation and vibration.

To avoid problems when operating vessels in these conditions, ship operators should consider limiting the main engine’s speed and the power output of the engine and arrange for the crew to closely monitor the stern tube bearing temperature. These actions, along with regular oil sampling and draining, can reduce the risk of such damage occurring, but shipowners and operators should also seek advice from their stern tube manufacturers, in order to implement procedures that can be adopted on board.

Finally, they should use manoeuvring tugs in ports or areas where these conditions may occur and reduce the demands for large rudder angles.

Leave a Reply

SSCP   CAS-002   9L0-066   350-050   642-999   220-801   74-678   642-732   400-051   ICGB   c2010-652   70-413   101-400   220-902   350-080   210-260   70-246   1Z0-144   3002   AWS-SYSOPS   70-347   PEGACPBA71V1   220-901   70-534   LX0-104   070-461   HP0-S42   1Z0-061   000-105   70-486   70-177   N10-006   500-260   640-692   70-980   CISM   VCP550   70-532   200-101   000-080   PR000041   2V0-621   70-411   352-001   70-480   70-461   ICBB   000-089   70-410   350-029   1Z0-060   2V0-620   210-065   70-463   70-483   CRISC   MB6-703   1z0-808   220-802   ITILFND   1Z0-804   LX0-103   MB2-704   210-060   101   200-310   640-911   200-120   EX300   300-209   1Z0-803   350-001   400-201   9L0-012   70-488   JN0-102   640-916   70-270   100-101   MB5-705   JK0-022   350-060   300-320   1z0-434   350-018   400-101   350-030   000-106   ADM-201   300-135   300-208   EX200   PMP   NSE4   1Z0-051   c2010-657   C_TFIN52_66   300-115   70-417   9A0-385   70-243   300-075   70-487   NS0-157   MB2-707   70-533   CAP   OG0-093   M70-101   300-070   102-400   JN0-360   SY0-401   000-017   300-206   CCA-500   70-412   2V0-621D   70-178   810-403   70-462   OG0-091   1V0-601   200-355   000-104   700-501   70-346   CISSP   300-101   1Y0-201   200-125  , 200-125  , 100-105  , 100-105  , CISM   NS0-157   350-018  , NS0-157   ICBB  , N10-006 test  , 350-050   70-534   70-178   220-802   102-400   000-106   70-411  , 400-101   100-101  , NS0-157   1Z0-803   200-125  , 210-060   400-201   350-050   C_TFIN52_66  , JN0-102  , 200-355   JN0-360   70-411   350-018  , 70-412   350-030   640-916   000-105   100-105  , 70-270  , 70-462   300-070  , 300-070   642-999   101-400   PR000041   200-101  , 350-030   300-070  , 70-270  , 400-051   200-120   70-178   9L0-012   70-487   LX0-103   100-105  ,